[Q35-Q60] Pass Your CompTIA Server+ SK0-005 Exam Easily with Accurate PDF Questions [May 24, 2022]

Share

Pass Your CompTIA Server+ SK0-005 Exam Easily with Accurate PDF Questions [May 24, 2022]

SK0-005 Certification Exam Dumps Questions in here

NEW QUESTION 35
Which of the following open ports should be closed to secure the server properly? (Choose two.)

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4
  • F. 5

Answer: C,E

Explanation:
Reference:
https://www.csoonline.com/article/3191531/securing-risky-network-ports.html

 

NEW QUESTION 36
A company has implemented a requirement to encrypt all the hard drives on its servers as part of a data loss prevention strategy. Which of the following should the company also perform as a data loss prevention method?

  • A. Implement port security on the switches
  • B. Block the servers from using an encrypted USB
  • C. Implement MFA on all the servers with encrypted data
  • D. Encrypt all network traffic

Answer: A

 

NEW QUESTION 37
A server administrator is configuring the IP address on a newly provisioned server in the testing environment. The network VLANs are configured as follows:

The administrator configures the IP address for the new server as follows:
IP address: 192.168.1.1/24
Default gateway: 192.168.10.1
A ping sent to the default gateway is not successful. Which of the following IP address/default gateway combinations should the administrator have used for the new server?

  • A. IP address: 192.168.10.3/24
    Default gateway: 192.168.20.1
  • B. IP address: 192.168.1.2/24
    Default gateway: 192.168.10.1
  • C. IP address: 192.168.10.24/24
    Default gateway: 192.168.30.1
  • D. IP address: 192.168.10.2/24
    Default gateway: 192.168.10.1

Answer: B

 

NEW QUESTION 38
A server administrator needs to deploy five VMs, all of which must have the same type of configuration. Which of the following would be the MOST efficient way to perform this task?

  • A. Use a VM template.
  • B. Snapshot a VM.
  • C. Use a physical host.
  • D. Perform a P2V conversion.

Answer: A

Explanation:
Deploying a virtual machine from a template creates a virtual machine that is a copy of the template. The new virtual machine has the virtual hardware, installed software, and other properties that are configured for the template.

 

NEW QUESTION 39
A server that recently received hardware upgrades has begun to experience random BSOD conditions. Which of the following are likely causes of the issue? (Choose two.)

  • A. Faulty memory
  • B. Incompatible disk speed
  • C. Uninitialized disk
  • D. Data partition error
  • E. Overallocated memory
  • F. Incorrectly seated memory

Answer: A,F

 

NEW QUESTION 40
A server administrator needs to harden a server by only allowing secure traffic and DNS inquiries. A port scan reports the following ports are open:

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4
  • F. 5

Answer: C

 

NEW QUESTION 41
Which of the following actions should a server administrator take once a new backup scheme has been configured?

  • A. Clone the configuration
  • B. Run a restore test
  • C. Check the media integrity
  • D. Overwrite the backups

Answer: C

 

NEW QUESTION 42
A user reports that a server is not accessible. A technician sees the following message on the server: PXE server not found. Which of the following should the technician attempt FIRST to resolve the issue?

  • A. Eject the disk in the CD-ROM and reboot the server.
  • B. Enter the BIOS and correct the boot sequence on the server.
  • C. Ensure the network cable is properly connected and reboot the server.
  • D. Power down the server and reseat the PCI cards.

Answer: B

 

NEW QUESTION 43
A company is building a new datacenter next to a busy parking lot. Which of the following is the BEST strategy to ensure wayward vehicle traffic does not interfere with datacenter operations?

  • A. Install bollards
  • B. Install security cameras
  • C. Utilize security guards
  • D. Install a mantrap

Answer: A

 

NEW QUESTION 44
A server administrator wants to run a performance monitor for optimal system utilization. Which of the following metrics can the administrator use for monitoring? (Choose two.)

  • A. CPU
  • B. Application
  • C. Services
  • D. Heartbeat
  • E. Memory
  • F. Page file

Answer: A,E

 

NEW QUESTION 45
A remote physical server is unable to communicate to the network through the available NICs, which were misconfigured. However, the server administrator is still able to configure the server remotely. Which of the following connection types is the server administrator using to access the server?

  • A. Local KVM setup
  • B. RDP connection
  • C. Crash cart access
  • D. Virtual administrator console
  • E. Out-of-band management

Answer: E

 

NEW QUESTION 46
A systems administrator is setting up a new server that will be used as a DHCP server. The administrator installs the OS but is then unable to log on using Active Directory credentials. The administrator logs on using the local administrator account and verifies the server has the correct IP address, subnet mask, and default gateway. The administrator then gets on another server and can ping the new server. Which of the following is causing the issue?

  • A. The server is experiencing a downstream failure
  • B. Port 443 is not open on the firewall
  • C. The local hosts file is blank
  • D. The server is not joined to the domain

Answer: D

 

NEW QUESTION 47
A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet-facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Answer:

Explanation:

 

NEW QUESTION 48
A server is performing slowly, and users are reporting issues connecting to the application on that server. Upon investigation, the server administrator notices several unauthorized services running on that server that are successfully communicating to an external site. Which of the following are MOST likely causing the issue?
(Choose two.)

  • A. Unnecessary services are disabled on the server
  • B. SELinux is enabled on the server
  • C. The firewall rule for the server is misconfigured
  • D. Adware is installed on the users' devices
  • E. Intrusion detection is enabled on the network
  • F. The server is infected with a virus

Answer: D,F

 

NEW QUESTION 49
Which of the following can be BEST described as the amount of time a company can afford to be down during recovery from an outage?

  • A. MTBF
  • B. RTO
  • C. MTTR
  • D. SLA

Answer: B

Explanation:
Reference:
https://whatis.techtarget.com/definition/recovery-time-objective-RTO

 

NEW QUESTION 50
A technician is connecting a Linux server to a share on a NAS. Which of the following is the MOST appropriate native protocol to use for this task?

  • A. CIFS
  • B. NFS
  • C. FTP
  • D. SFTP

Answer: A

 

NEW QUESTION 51
A technician has been asked to check on a SAN. Upon arrival, the technician notices the red LED indicator shows a disk has failed. Which of the following should the technician do NEXT, given the disk is hot swappable?

  • A. Replace the disk
  • B. Stop sharing the volume
  • C. Stop all connections to the volume
  • D. Shut down the SAN

Answer: A

 

NEW QUESTION 52
A server administrator has noticed that the storage utilization on a file server is growing faster than planned. The administrator wants to ensure that, in the future, there is a more direct relationship between the number of users using the server and the amount of space that might be used. Which of the following would BEST enable this correlation?

  • A. Partitioning
  • B. Disk quotas
  • C. Deduplication
  • D. Compression

Answer: B

 

NEW QUESTION 53
A server administrator was asked to build a storage array with the highest possible capacity. Which of the following RAID levels should the administrator choose?

  • A. RAID 6
  • B. RAID 5
  • C. RAID 0
  • D. RAID 1

Answer: C

 

NEW QUESTION 54
Which of the following tools will analyze network logs in real time to report on suspicious log events?

  • A. SIEM
  • B. HIPS
  • C. DLP
  • D. Syslog

Answer: A

Explanation:
Reference:
https://www.manageengine.com/products/eventlog/syslog-server.html

 

NEW QUESTION 55
A systems administrator is trying to run a program on the server to query the database. When attempting to launch the program, the screen flashes and the program closes. Which of the following should the technician do to get the program to open correctly? (Choose two.)

  • A. Log on to the server as the database administrator.
  • B. Check HIPS logs to see if the application is blocked.
  • C. Stop the database and restart the server.
  • D. Launch the program running as the administrator.
  • E. Log on to the server as the backup administrator.

Answer: B,D

 

NEW QUESTION 56
Which of the following server types would benefit MOST from the use of a load balancer?

  • A. Web server
  • B. DNS server
  • C. DHCP server
  • D. File server

Answer: A

Explanation:
Reference:
https://www.dnsstuff.com/what-is-server-load-balancing

 

NEW QUESTION 57
Which of the following is typical of software licensing in the cloud?

  • A. Site-based
  • B. Per socket
  • C. Subscription-based
  • D. Perpetual

Answer: C

 

NEW QUESTION 58
Which of the following must a server administrator do to ensure data on the SAN is not compromised if it is leaked?

  • A. Encrypt the data that is leaving the SAN
  • B. Encrypt the host servers
  • C. Encrypt the data at rest
  • D. Encrypt all the network traffic

Answer: C

 

NEW QUESTION 59
A server administrator is experiencing difficulty configuring MySQL on a Linux server. The administrator issues the getenforce command and receives the following output:
># Enforcing
Which of the following commands should the administrator issue to configure MySQL successfully?

  • A. setenforce disabled
  • B. setenforce 0
  • C. setenforce permissive
  • D. setenforce 1

Answer: B

Explanation:
Reference:
https://blogs.oracle.com/mysql/selinux-and-mysql-v2

 

NEW QUESTION 60
......

Updated SK0-005 Exam Practice Test Questions: https://exam-labs.itpassleader.com/CompTIA/SK0-005-dumps-pass-exam.html

0
0
0
0