[Q219-Q241] Attested 303 Dumps PDF Resource [2022]

Share

Attested 303 Dumps PDF Resource [2022]

Latest 303 Actual Free Exam Questions Updated 525 Questions

NEW QUESTION 219
-- Exhibit -

-- Exhibit --
Refer to the exhibit.
Based on the output of the tmsh interface show command, what is the issue?

  • A. There are too many drops on inbound traffic on interface 1.1.
  • B. Flow Control is NOT configured on the management interface.
  • C. There is a duplex mismatch on the management interface.
  • D. Interfaces 2.1 and 2.2 are defective and need replacement.

Answer: C

 

NEW QUESTION 220
An LTMSpecialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.
Which configuration should the LTM Specialist use to meet the requirement?

  • A. Move the BIG-IP Managers from TG1 to TG2
  • B. Create a new partition and set the default traffic group to TG2
  • C. Restrict the Traffic Group Access of BIG-I Managers to TG2
  • D. Modify the default traffic group of the Common partition to TG2

Answer: B

 

NEW QUESTION 221
Refer to the exhibit.

During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

  • A. The interface on the Active device to 1.1
  • B. The Interface on the Standby device to 1.1
  • C. The Tag value on the Active device
  • D. The Tag voice on the Standby device

Answer: D

 

NEW QUESTION 222
The end users of a web application need to verify that their browsers received the complete message-body from the web server.
Which HTTP header will accomplish this?

  • A. Content-Length
  • B. Range
  • C. Accept-Ranges
  • D. Expect

Answer: A

 

NEW QUESTION 223
-- Exhibit -


-- Exhibit --
Refer to the exhibits.
An LTM device has been configured for load balancing a number of different application servers.
Configuration changes need to be made to the LTM device to allow administrative management of the servers in 172.16.10/24, 172.16.20/24, and 172.16.30/24 networks. The servers require outbound access to numerous destinations for operations.
Which solution has the simplest configuration changes while maintaining functionality and basic security?

  • A. Remove 172.16.10.0:0/24, 172.16.20.0:0/24, and 172.16.30.0:0/24, and keep 0.0.0.0:0/0.0.0.0 enabled on all VLANs.
  • B. Enable 172.16.10.0:0/24, 172.16.20.0:0/24, and 172.16.30.0:0/24 on egress VLAN(s), and enable
    0.0.0.0:0/0.0.0.0 on ingress VLAN(s).
  • C. Replace 172.16.10.0:0/24, 172.16.20.0:0/24, and 172.16.30.0:0/24, with 172.16.0.0:0/16, and keep
    0.0.0.0:0/0.0.0.0.
  • D. Enable 172.16.10.0:0/24, 172.16.20.0:0/24, and 172.16.30.0:0/24 on ingress VLAN(s), and enable
    0.0.0.0:0/0.0.0.0 on egress VLAN(s).

Answer: D

 

NEW QUESTION 224
An LTM Specialist is troubleshooting an HTTP monitor. The pool member is accessible directly through a browser, but the HTTP monitor is marking the pool member as down.
GET / HTTP/1.1
HTTP/1.1 400 Bad Request
DatE. Tue, 23 Oct 2012 21:39:07 GTM
Server: Apache/2.2.22 (FreeBSD) PHP/5.4.4
mod_ssl/2.2.22 OpenSSL/0.9.8q DAV/2
Content-LengtH. 226
Connection: close
Content-TypE. text/html; charset=iso-8859-1
Which issue is the pool member having?

  • A. The pool member lacks the object requested by the monitor.
  • B. The pool member has too many concurrent connections.
  • C. The pool member is NOT accepting requests from the LTM device IP address.
  • D. The pool member is rejecting the request because it is invalid.

Answer: D

 

NEW QUESTION 225
An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.
TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.
TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLStransactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?

  • A. 2060 new TLS transactions will be silently discarded due to the SSL TPS license limit
  • B. Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.
  • C. 560 new TLS transactions will be silently discarded due to the SSL TPS license limit
  • D. Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit

Answer: C

 

NEW QUESTION 226
Which Virtual Server type should be used to load balance HTTP traffic to a pool of servers?

  • A. Stateless
  • B. Forwarding (IP)
  • C. Forwarding (Layer 2)
  • D. Standard

Answer: D

 

NEW QUESTION 227
Refer to the exhibit.

The pool shown isconfigured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.
Which changes need to be made?

  • A. Enable 10.80.1.40 and 10.80.1.20 disable priority group activation, enable ratio.
  • B. Enable 10.80.1.40 disable priority group activation, enable ratio
  • C. Enable 10.80.1.20 disable priority group activation, enable Round Robin
  • D. Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin

Answer: D

 

NEW QUESTION 228
-- Exhibit -


-- Exhibit --
Refer to the exhibits.
How should the LTM Specialist minimize the configuration?

  • A. Create a single monitor, apply it to the pool, and remove the pool member level monitors.
  • B. Remove the pool member level monitors.
  • C. The configuration is as minimized as possible.
  • D. Create a single monitor and apply it to each pool member.

Answer: A

 

NEW QUESTION 229
A development team needs to apply a software fix and troubleshoot one of its servers. The BIG-IP Administrator needs to immediately remove all connections from the BIG-IP system to the back end server.
The BIG-IP Administrator checks the Virtual Server configuration and finds that a persistence profile is assigned to it. What should the 8IG-IP Administrator do to meet this requirement?

  • A. Set the pool member to a Forced Offline state.
  • B. Set the pool member to a Disabled state.
  • C. Set the pool member to a Disabled state and manually delete existing connections through the command line.
  • D. Set the pool member to a Forced Offline state and manually delete easting connections through the command line.

Answer: D

 

NEW QUESTION 230
A set of servers is used for an FTP application as well as an HTTP website via separate BIG-IP Pools. The server support team reports that some servers are receiving a lot more traffic than others.
Which Load Balancing Method should the BIG-IP Administrator apply to even out the connection count?

  • A. Ratio (Node)
  • B. Least Connections (Member)
  • C. Least Connections (Node)
  • D. Ratio (Member)

Answer: C

Explanation:
Explanation
The connection is required to be balanced, and the unit is the server and the application port is the unit, so it is node.

 

NEW QUESTION 231
A BIG-IP Administrator reviews the Plane CPU Usage performance chart and discovers a high percentage of Control Plane utilization.
Which type of traffic does this indicate a higher usage of?

  • A. Administrative
  • B. Accelerated ,
  • C. Application
  • D. Tunnel

Answer: A

 

NEW QUESTION 232
A BIG-IP Administrator needs to collect HTTP status code and HTTP method for traffic flowing through a virtual server.
Which default profile provides this information?

  • A. Request Adapt
  • B. Analytics
  • C. HTTP
  • D. Statistics

Answer: C

 

NEW QUESTION 233
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?

  • A. modify /sys provision Itm level minimum
  • B. modify/sys provision asm level minimum
  • C. modify /sys provision asm level none
  • D. modify /sys provision Itm level dedicated

Answer: B

 

NEW QUESTION 234
A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix.
What should the BIG-IP Administrator do to change the boot location to the previous hotfix?

  • A. Reinstall the base version and install the previous hotfix
  • B. Reinstall the previous hotfix and re-activate the license
  • C. Uninstall the base version and restore the UCS
  • D. Uninstall the newest hotfix and reinstall the previous hotfix

Answer: A

 

NEW QUESTION 235
What does the following iRule do?
when CLIENT_ACCEPTED {
if { [matchclass [IP::client_addr] equals WebClient1-Whitelist1] }{
#log local0. "Valid client IP: [IP::client_addr] - forwarding traffic"
#Pool WebClient1
} else {
log local0. "Invalid client IP: [IP::client_addr] - discarding"
discard
}
}

  • A. The iRule compares a client IP to a list. If the client IP is NOT on the list, discard and log the discard.
  • B. The iRule compares a client IP to a list. If the client IP is on the list, the client is sent to Pool WebClient1. Otherwise, discard and log the discard.
  • C. The iRule compares a client IP to a list. If the client IP is on the list, discard and log the discard.
  • D. The iRule compares a client IP to a list. If the client IP is NOT on the list, the client is sent to Pool WebClient1. Otherwise, discard and log the discard.

Answer: A

 

NEW QUESTION 236
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?

  • A. /var/log/audit
  • B. /var/log/ltm
  • C. /war /log/daemon.log
  • D. /var/log/kern.log

Answer: B

 

NEW QUESTION 237
An LTMSpecialist must reconfigure a BIG-IP LTM system that load balances traffic to web application servers. The application developer inform the LTM Specialist that TLS must be used to communicate with the application servers.
Which additional profile isrequired as part of virtual server configuration?

  • A. Rewrite profile
  • B. Client SSL
  • C. Server SSL
  • D. SPDV profile

Answer: C

 

NEW QUESTION 238
A BIG-IP Administrator finds the following log entry after a report of user issues connecting to a virtual server:
01010201: 2: Inet port exhaustion on 10.70.110.112 to 192.28.123.250:80 (proto 6) How should the BIG-IP Administrator modify the SNAT pool that is associated with the virtual server?

  • A. Remove an IP address from the SNAT pool.
  • B. Remove the SNAT pool and apply SNAT Automap.
  • C. Add an address to the SNAT pool.
  • D. Increase the timeout of the SNAT addresses.

Answer: C

 

NEW QUESTION 239
Users in a branch office are reporting a website is always slow. No other users are experiencing the problem.
The LTM Specialist tests the website from the external VLAN along with testing the servers directly. All tests indicate normal behavior. The environment is a single HTTP virtual server on the external VLAN with a single pool containing three HTTP pool members on the internal VLAN.
Which two locations are most appropriate to collect additional protocol analyzer data? (Choose two.)

  • A. a user's Active Directory authentication
  • B. the LTM device's internal VLAN
  • C. the LTM device's external VLAN
  • D. a user's machine
  • E. the switch local to the user

Answer: D,E

 

NEW QUESTION 240
Refer to the Exhibit.

An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 241
......

303 Certification Overview Latest 303 PDF Dumps: https://exam-labs.itpassleader.com/F5/303-dumps-pass-exam.html

0
0
0
0