Achieve The Utmost Performance In 300-510 Exam Pass Guaranteed
Achive your Success with Latest Cisco 300-510 Exam
The Implementing Cisco Service Provider Advanced Routing Solutions certification exam consists of 60-70 multiple-choice and simulation-based questions that must be completed within 90 minutes. 300-510 exam is part of the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification track, which is designed for service provider network engineers, architects, and designers who are responsible for implementing and supporting advanced routing solutions in service provider networks.
Cisco 300-510 certification exam is an essential credential for networking professionals who want to demonstrate their expertise in implementing advanced routing solutions in a service provider environment. With this certification, professionals can advance their career and gain recognition as experts in this field.
Cisco 300-510 certification exam is a rigorous assessment that tests the knowledge and skills of IT professionals in implementing advanced routing solutions for service providers. It is a prerequisite for obtaining the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification and is highly valued by employers in the service provider industry. Candidates who pass 300-510 exam demonstrate a high level of proficiency in implementing advanced routing solutions and are well-positioned to advance their careers in this field.
NEW QUESTION # 96
Refer to the exhibit. The extension header of the IPv6 header is ignored when which value is equal to zero?
- A. Segments Left
- B. Routing Type
- C. Next Header
- D. Hdr Ext Len
Answer: A
Explanation:
https://www.ciscopress.com/articles/article.asp?p=31948
NEW QUESTION # 97
Refer to the exhibit
An engineer is configuring service traffic from router R1 to R6 as shown. Which additional configuration must the engineer implement so that the LDP and SR domains will participate and interwork with each other?
- A. Router2(config)# segment-routing
Router2(config-sr)# mapping-server
Router2(config-sr-ms)# prefix-sid-map
Router2(config-sr-ms-map)# address-family ipv4
Router2(config-sr-ms-map-af)# 10.1.1.1/32 500 range 50 - B. Router2(config)# segment-routing
Router2(config-sr)# ldp mapping-server
Router2(config-sr-ms)# prefix-sid-map
Router2(config-sr-ms-map)# address-family ipv4
Router2(config-sr-ms-map-af)# 2.2.2.2/32 500 range 40 - C. Router2(config)# segment-routing
Router2(config-sr)# sr mapping-server
Router2(config-sr-ms)# ldp-sid-map
Router2(config-sr-ms-map)# address-family ipv4
Router2(config-sr-ms-map-af)# 10.1.1.1/32 500 range 50 - D. Router2(config)# segment-routing
Router2(config-sr)# ldp mapping-server
Router2(config-sr-ms)# prefix-sid-map
Router2(config-sr-ms-map)#
Router2(config-sr-ms-map-af)# 2.2.2.2/32 500 range 4
Answer: A
NEW QUESTION # 98
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 99
Refer to the exhibit. Which tree does multicast traffic follow?
- A. shared tree
- B. MDT voice
- C. source tree
- D. MDT default
Answer: D
NEW QUESTION # 100
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/47868-ospfdb9.html
NEW QUESTION # 101
Refer to the exhibit. A service provider technician is working on a multicast issue for a customer.
While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only GLOP is permitted
- B. Only ASM is permitted
- C. Only the default SSM range is permitted
- D. Only the administratively scoped range is permitted
Answer: C
NEW QUESTION # 102
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?
- A. The interface mode ip router is-is command was not included in the script
- B. The same interface cannot be advertised in two different IS-IS instances
- C. The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship
- D. The IS-IS "ISP" and "ISP2" instances are unrelated and unable to intercommunicate
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_isis/configuration/xe-3s/irs-xe-3s-book/ irs-instance-vrf.html
NEW QUESTION # 103
Refer to the exhibit.
Refer to the exhibit. Company A established BGP sessions with several ISPs. A network engineer at the company must filter out all traffic except for routes that transit AS 152. The engineer configured the filtering policy "permit _152S_(_[0.9])" on R1, but after applying the configuration, the engineer notices that other routes are still visible. Which action resolves the issue?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: B
NEW QUESTION # 104
Refer to the exhibit.
What is the relationship between Router 1 and Router 2?
- A. Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.
- B. Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.
- C. Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1.
- D. Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.
Answer: D
NEW QUESTION # 105
Which statement about BFD on Cisco IOS XR Software is true?
- A. Cisco IOS XR Software does not support BFD multihop for IPv4.
- B. Cisco IOS XR router must use dynamic routing or a static route back to the Cisco IOS router to establish the peer relationship.
- C. Cisco IOS XR router must use LDP to route back to the Cisco IOS router to establish the peer relationship.
- D. BFD is not compatible between Cisco IOS XR and Cisco IOS Software.
Answer: B
Explanation:
Reference:
guide/b-routing-cg-asr9000-63x/b-routing-cg-asr9000-63x_chapter_0100.html
NEW QUESTION # 106
Which statement about enabling segment routing for IGPs is true?
- A. Segment routing can be enabled only under the routing process
- B. Segment routing must first be enabled under then routing process and then globally
- C. Segment routing must first be enabled globally and then under the routing process
- D. Segment routing can be enabled only globally
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/seg_routing/configuration/xe-16-6/segrt-xe-16-6- book/sr-ospfv2-node-sid.html
NEW QUESTION # 107
Refer to the exhibit. Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing.
Which BGP configuration must be added to the configuration?
- A. It must be configured with send labels
- B. It must be configured for graceful restart
- C. It must be configured with PIC edge
- D. It must be configured with a route reflector
Answer: A
NEW QUESTION # 108
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
- B. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
- D. Router 1 has a list of labels used to explicitly lay out a path to router 2.
Answer: C
NEW QUESTION # 109
Refer to the exhibits.
A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1. Which interface and label path should the operator investigate next?
- A. PE1 - Gi0/0/0/3 - forwarding label 24002
- B. PE1 - Gi0/0/0/2 - forwarding label 24002
- C. PE1 - Gi0/0/0/3 - forwarding label 24001
- D. PE1 - Gi0/0/0/2 - forwarding label 24001
Answer: C
NEW QUESTION # 110
Refer to the exhibit.
An engineer has configured all routers in the environment to run IS-IS Level 1 and Level 2 routing. The engineer wants traffic from R1 to R5 to pass via R2. but IS-IS routing has calculated the best path via R4.
Which action corrects the problem?
- A. Configure routers R1, R4, and R5 for Level 2 routing only.
- B. Set the link metric for the link from router R1 to router R4 to 30 or more.
- C. Set the link metric on R2 for the links from router R2 to routers R3 and R4 to 30 or more.
- D. Configure routers R1, R2, and R5 for Level 1 routing only.
Answer: B
NEW QUESTION # 111
Refer to the exhibit.
An engineer applied the summarization configuration on R1 for four networks (192.168.20.0/24 to 192.168.23.0/24) in area 1 and eight networks (192.168.32.0/24 to 192.168.39.0/24) in area 2 to stop the flooding of all the customer routes. While checking the routing table of R2, the engineer noticed that R1 is still sending only specific routes to R2. Which configuration should the engineer apply on R1 to summarize routes?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: B
NEW QUESTION # 112
Refer to the exhibit.
There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION # 113
Refer to the exhibit. How are packets directed through the data plane when SRv6 is implemented?
- A. The MPLS data plane is used to push labels onto IGP routes
- B. A stack of labels represents an ordered list of segments
- C. The packet is encapsulated with a header and trailer encoding the ordered list of segments
- D. An ordered list of segments is encoded in a routing extension header
Answer: D
Explanation:
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf
NEW QUESTION # 114
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- B. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- C. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- D. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
Answer: D
Explanation:
Reference:
html#wp1552800140
NEW QUESTION # 115
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. R1 prefer to use R5 as the next hop to reach R4
- B. All links have equal cost if the default metric is used
- C. R4 prefer to reach R5 using R1 as the next hop
- D. R5 prefers to use R4 as the next hop for all routes
Answer: B
NEW QUESTION # 116
Which output from the show isis interface command helps an engineer troubleshoot an IS-IS adjacency problem on a Cisco IOS-XR platform?
- A. circuit type
- B. metric
- C. priority
- D. hello interval
Answer: A
NEW QUESTION # 117
Refer to the exhibit.
R2
Answer:
Explanation:
Solution:-
R1
Int loopback0
Ip ospf 10 area 0
Int loopback10
Ip ospf network point-to-point
Int loopback20
Ip ospf network point-to-point
Int loopback30
Ip ospf network point-to-point
Router ospf 10
Area 1 range 172.16.100.0 255.255.252.0
Copy run start
Verification: -
NEW QUESTION # 118
......
Revolutionary Guide To Exam Cisco Dumps: https://exam-labs.itpassleader.com/Cisco/300-510-dumps-pass-exam.html