(2023) 5V0-31.20 Dumps and Practice Test (74 Questions)
Guide (New 2023) Actual VMware 5V0-31.20 Exam Questions
NEW QUESTION 41
An administrator creates a management domain using the VMware Cloud Bulkier appliance Which type of storage must be used as principal storage for the management domain?
- A. VMFS on FCoE
- B. vSAN
- C. VMFS on FC
- D. NFS
Answer: B
NEW QUESTION 42
An administrator has been tasked with adding capacity to an existing workload domain. The new hosts have hosts arrived but will need to be prepared before they can be added to VMware Which two steps must be performed to facilitate imaging with the VMware Imaging Appliance? (Choose two )
- A. Configure the hosts to boot from SAN.
- B. Configure option 43 on DHCP servers
- C. Ensure that UEFl is enabled in BIOS.
- D. Configure the hosts to PXE boot
- E. Configure Legacy boot mode in BIOS.
Answer: A,B
NEW QUESTION 43
Which two components are required to support the initial bring-up of an automated VMware Cloud Foundation 4 x deployment? (Choose two)
- A. VMware vSphere Security Configuration Guide
- B. Deployment Parameter Workbook
- C. VMware vRealize Suite Lifecycle Manager
- D. VMware SDDC Manager
- E. VMware Cloud Builder
Answer: D,E
NEW QUESTION 44
An administrator wants to configure a stretched cluster and needs to configure vMotion, Which type of network connection is supported for vMotion.
- A. The vSphere vMotion network must be routed via VPN.
- B. The vSphere vMotion network must be routed between sites.
- C. The vSphere vMotion network must be routed via VMware HCX.
- D. The vSphere vMotion network must be stretched via VMware MCX
Answer: C
NEW QUESTION 45
The administrator for an existing VMware Cloud Foundation instance has one management domain (sfo-m01) and one workload domain (sfo-w01). The workload domain consists of two vSphere clusters (sfo-w01-ci01 and sfo-w01-cl02) using vSAN as principle storage.
The workload domain also includes an NSX-T Edge Cluster deployed in the default cluster (sfo-w01-c01) of the workload domain. The first cluster (sfo-w01-c01) rack1, and the second cluster (sfo-w01-c01) resides in rack 1.
A new project is underway, and the capacity of the second cluster (sfo-w0I cl02) of the workload domain that will be consumed by vRealize Automation needs to be expanded Rack 1 is at capacity. Eight additional hosts have been placed in rack 2 and cabled within the new rack. The network architecture is an L3 spine leaf architecture.
Which cluster expansion type should be selected when expanding the second cluster using the SDDC Manager UI?
- A. L2 non-uniform
- B. L2 uniform
- C. L2 non-uniform and L3
- D. L3 non-uniform and L2
Answer: B
NEW QUESTION 46
A new security vulnerability has been identified in SSL. The VMware vCenter appliances in the company's latest VMware Cloud Foundation environment have been found to be impacted VMware has released an updated ISO and upgrade bundle.
Which method should the administrator use to remediate this security vulnerability?
- A. Use VMware Lifecycle Manager to apply the update.
- B. Use VMware Update Manager to apply the update.
- C. Use NSX-T Distributed Firewall to block all incoming traffic until the patch is applied.
- D. Update VMware Cloud Foundation to a release containing the patch.
Answer: B
NEW QUESTION 47
An administrator has been tasked with deploying a VMware Cloud Foundation Workload Domain Stretched Cluster that consists of eight (8) hosts hour (4) hosts have been successfully deployed and commissioned in Availability Zone 1 (AZ1).
All other required prerequisites have been met The administrator has started the procedure of stretching the VMware vSAN cluster by creating a new network pool in Availability Zone 2 (AZ2) What is the next step in the procedure?
- A. Commission the four (4) hosts within SDDC Manager
- B. Stretch the VMware vSAN Cluster using the API.
- C. Get the UIDs of the hosts in AZ1 using the API Explorer.
- D. Get the UID of the Cluster in A21 using the API Explorer
Answer: A
NEW QUESTION 48
An administrator is creating network pools.
What must be considered for sizing the network pools?
- A. Number of workload domains
- B. Number of virtual machines
- C. Number of pods
- D. Number of users
Answer: A
NEW QUESTION 49
Which two components are included in the NSX-T upgrade process within VMware Cloud Foundation? (Choose two.)
- A. Virtual Distributed Switch (vDS)
- B. VMware vCenter Server
- C. NSX-T Upgrade Coordinator service
- D. NSX-T VIBs installed on ESXi hosts
- E. NSX-T Controllers
Answer: C,D
NEW QUESTION 50
Which two statements are correct about VMware Cloud Foundation (VCF) license editions'' (Choose two)
- A. All VCF license editions have the capability of automated deployment and lifecycle management of user workloads
- B. VCF Starter Edition allows stretching clusters across multiple availability zones.
- C. VCF Enterprise Edition has the capability to use Tanzu Kubemetes services on vSphere.
- D. All VCF license editions include automated deployment and lifecycle management of VCI components
- E. VCF Advanced Edition allows large-scale migrations from old environments to VCF
Answer: A,D
NEW QUESTION 51
An administrator is tasked with configuring VMware Cloud Foundation NSX-T environment tor dynamic routing. Which routing protocol must be used?
- A. RIP
- B. OSPF
- C. BGP
- D. EIGRP
Answer: B
NEW QUESTION 52
What is the correct syntax to collect SDDC Manager logs to Amp folder while performing health check?
- A. /opt/vmware/sddc-support/sos - sddc-manager-logs -log-dir /tmp
- B. /opt/vmware/sddc support/sos -sddc-manager-logs -Jog dir /tmp -no-health-check
- C. /usr/bin/sddc-support/sos -sddc-manager-logs -log-dir/tmp
- D. /usr/bin/sddc-support/sos -api-Jogs -log-dir /tmp
Answer: D
NEW QUESTION 53
During a design discussion around VMware Cloud Foundation, it was identified that
* The customer has workloads that have requirements related to logical load balancing
* The customer would like to size the different Edge nodes based on application requirements How can these requirements be met when planning for VMware Cloud Foundation NSX-T Edge deployment through SDDC Manager?
- A. Deploy Bare Metal Edges
- B. Use the Custom option
- C. Use Workload Management
- D. Use NSX-T API calls
Answer: D
NEW QUESTION 54
A system administrator needs to perform an image based backup of SDDC Manager using VMware vSphere Storage APIs - Data Protection Which type of backup must be performed to reduce the backup time and storage cost?
- A. Incremental
- B. Differential
- C. Mirror
- D. Synthetic full
Answer: A
NEW QUESTION 55
What is the benefit of placing vRealize Suite I ifecycle Manager on the cross-region Application Virtual Network?
- A. SDDC Manager uses the cross-region network to deploy vRealize Log Insight and vRealize Automation Proxy Servers, and this is not configurable.
- B. vRealize Suite Lifecycle Manager can be deployed in cluster mode
- C. After a recovery, an administrator can continue using the same IP address, DNS record, and routing configuration
- D. vRealize Suite Lifecycle Manager cannot be placed on the cross-region network as it is reserved for Workload VMs only.
Answer: D
NEW QUESTION 56
Which two integrations, in addition to computing resources, are provided in vSPhere with Tanzu to deliver a native experience (Choose two.)
- A. Hypervisor Integration with KVM Hosts
- B. IP Address Management via External Services
- C. Cloud Native Storage via vSAN
- D. Networking via NSX Container Plugin
- E. Advanced Monitoring with VMware Tools
Answer: B,C
NEW QUESTION 57
An administrator must upgrade an existing ESXi cluster that is part of a VMware Cloud Foundation environment with a predefined image. Including firmware and vendor add-ons.
Which method should the administrator use to perform the upgrade?
- A. vReafcze Suite Lifecycle Manager
- B. vCenter Lifecycle Manager
- C. vSphere Lrfecycle Manager
- D. vSphere Update Manager
Answer: A
NEW QUESTION 58
A customer is planning to upgrade NSX r in a VMwarc Cloud Foundation consolidated deployment to unlock new features. Which factor must be considered during this planning phase?
- A. NSX-T follows the Management Doman upgrade Bill of Material.
- B. NSX-T Manager must be converged to standalone before the upgrade.
- C. SDDC Manager, vCenter Server and PSCs must be upgraded first.
- D. NSX-T upgrades can be performed separately from the VI Domain
Answer: B
NEW QUESTION 59
Which role is required to edit backup configuration in SDDC Manager?
- A. OPERATOR
- B. POWER USER
- C. ADMIN
- D. SUPER ADMIN
Answer: C
NEW QUESTION 60
An administrator is tasked with deploying a new workload domain into an existing VMware Cloud Foundation environment. Which two storage types are supported? (Choose two.)
- A. VMFS on FC
- B. vSAN
- C. NFS v2
- D. SMB3.0
- E. VMFS on iSCSI
Answer: A,B
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.3/vcf-admin/GUID-2C4653EB-5654-45CB-B072-2C2E29CB6C89.html
NEW QUESTION 61
Which architectural deployment type/model is supported?
- A. In a standard VMware Cloud Foundation 4 x architecture, each Workload Domain hosts its own vCenter server.
- B. In a standard VMware Cloud Foundation 4.x architecture, a VMware Lifecycle Manager appliance is deployed in each Workload Domain
- C. In a consolidated VMware Cloud Foundation 4.x architecture, VMware vRealize Automation is deployed in the Management Workload Domain.
- D. In a consolidated VMware Cloud foundation 4 x architecture, workload VMs and Management VMs must share the same resource pool.
Answer: A
NEW QUESTION 62
......
VMware 5V0-31.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
5V0-31.20 Exam Dumps Pass with Updated 2023 Certified Exam Questions: https://exam-labs.itpassleader.com/VMware/5V0-31.20-dumps-pass-exam.html