[Apr 11, 2026] FCP_FAZ_AD-7.4 Questions Truly Valid For Your Fortinet Exam!
FCP_FAZ_AD-7.4 Actual Questions - Instant Download Tests Free Updated Today!
NEW QUESTION # 37
What can the CLI command # diagnose test application oftpd 3 help you to determine?
- A. What logs, if any, are reaching FortiAnalyzer
- B. What devices are registered and unregistered
- C. What devices and IP addresses are connecting to FortiAnalyzer
- D. What ADOMs are enabled and configured
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/cli-reference/395556/test#test_application
NEW QUESTION # 38
Which two parameters are used to calculate the Total Quota value available on FortiAnalyzer? (Choose two.)
- A. Retention policy
- B. Total system storage
- C. Reserved space
- D. Used storage
Answer: B,C
Explanation:
The Total Quota is derived from the total system storage minus any reserved space allocated for system use, such as databases, system files, or reserved space for log retention policies. Used storage and retention policies do not directly impact the calculation of the quota available, though they can influence overall space utilization.
NEW QUESTION # 39
You are trying to initiate an authorization request from FortiGate to FortiAnalyzer, but the Security Fabric window does not open when you click Authorize.
Which two reasons can cause this to happen? (Choose two.)
- A. A pre-shared key needs to be established on both sides.
- B. The management computer does not have connectivity to the authorization IP address and port combination.
- C. The fabric authorization settings on FortiAnalyzer are misconfigured.
- D. The Security Fabric root is unauthorized and needs to be added as a trusted host.
Answer: B,C
Explanation:
B . The management computer does not have connectivity to the authorization IP address and port combination. If the FortiGate cannot reach the FortiAnalyzer on the configured IP address and port (typically HTTPS), the authorization request will fail. This could be due to firewall rules, routing issues, or incorrect configuration.
D . The fabric authorization settings on FortiAnalyzer are misconfigured. FortiAnalyzer needs to be properly configured to accept authorization requests. This includes settings like enabling Security Fabric and configuring the correct authorization method.
NEW QUESTION # 40
Which process caches logs on FortiGate when FortiAnalyzer is not reachable?
- A. oftpd
- B. miglogd
- C. logfiled
- D. sqlplugind
Answer: B
NEW QUESTION # 41
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To remove the analytics logs of the device from the old database
- B. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- C. To reset the ADOM disk quota enforcement to its default value
- D. To migrate the archive logs to the new ADOM
Answer: B
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The command execute sql-local rebuild- adom <new-ADOM-name> is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 42
What are offline logs on FortiAnalyzer?
- A. Compressed logs, also known as archive logs
- B. Logs that are indexed and stored in the SQL database
- C. Real-time logs that are not yet indexed
- D. Any logs collected from offline devices after they boot up
Answer: D
Explanation:
These logs are generated when devices that were previously offline come back online and send their log data to the FortiAnalyzer.
NEW QUESTION # 43
What is the purpose of the following CLI command?
- A. To encrypt log communications
- B. To add a log file checksum
- C. To add the MD's hash value and authentication code
- D. To add a unique tag to each log to prove that it came from this FortiAnalyzer
Answer: B
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 44
Which two statements are true regarding high availability (HA) on FortiAnalyzer? (Choose two.)
- A. All devices in a FortiAnalyzer HA cluster must run in the same operation mode: analyzer or collector.
- B. FortiAnalyzer HA implementation is supported by many public cloud infrastructures such as AWS, Microsoft Azure, and Google Cloud.
- C. FortiAnalyzer HA can function without VRRP. and VRRP is required only if you have more than two FortiAnalyzer devices in a cluster.
- D. FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.
Answer: A,D
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp/60/6-0-2/Content/FMG-FAZ/4600_HA/0000_HA.htm?
TocPath=High%20Availability%7C_____0
FortiAnalyzer HA implementation works only in networks where Virtual Router Redundancy Protocol (VRRP) is permitted. Therefore it may not be supported by some public cloud infrastructures.
NEW QUESTION # 45
What is the purpose of a dataset query in FortiAnalyzer?
- A. It retrieves log data from the database
- B. It sorts log data into tables
- C. It injects log data into the database
- D. It extracts the database schema
Answer: A
Explanation:
Reference: https://docs2.fortinet.com/document/fortianalyzer/6.0.4/administration-guide/148744/creating- datasets
NEW QUESTION # 46
Which two statements about high availability (HA) on FortiAnalyzer are true? (Choose two.)
- A. FortiAnalyzer HA active-passive mode can function without VRRP.
- B. All devices in a FortiAnalyzer HA cluster must run in the same operation mode, either analyzer mode or collector mode.
- C. All devices in a FortiAnalyzer HA cluster must have the same available disk space.
- D. FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.
Answer: D
Explanation:
The two correct statements about high availability (HA) on FortiAnalyzer are:
FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.
FortiAnalyzer HA synchronizes both logs and certain system configuration settings between the units in the cluster to ensure consistent operation.
All devices in a FortiAnalyzer HA cluster must run in the same operation mode, either analyzer mode or collector mode.
In an HA cluster, all devices must be configured to operat` e in the same mode - either analyzer mode or collector mode-to ensure consistency and proper functionality across the cluster.
The other options, such as VRRP, are not required for HA in FortiAnalyzer, and disk space can vary between nodes but may impact log storage capacity.
NEW QUESTION # 47
What are offline logs on FortiAnalyzer?
- A. Compressed logs, also known as archive logs
- B. Logs that are indexed and stored in the SQL database
- C. Any logs collected from offline devices after they boot up
- D. Real-time logs that are not yet indexed
Answer: A
Explanation:
Archive logs: When a real-time log file in Archive has been completely inserted, that file is compressed and considered to be offline." https://docs.fortinet.com/document/fortianalyzer/7.4.3/administration-guide/381919/logs
NEW QUESTION # 48
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer?
(Choose two.)
- A. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- B. By default. Log Data Sync is disabled on all backup devices.
- C. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- D. Log Data Sync provides real-time log synchronization to all backup devices.
Answer: A,D
Explanation:
Log Data Sync provides real-time log synchronization to all backup devices. - Log Data Sync in FortiAnalyzer HA setups is designed to ensure that all backup devices in the cluster are kept up-to-date with real-time log data from the primary device. This synchronization helps maintain log integrity and availability even in the event of a primary device failure.
With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device. - When a new unit is added to an HA cluster, Initial Logs Sync is crucial to ensure that the new unit starts with a complete set of logs. This process involves the primary device synchronizing its existing logs to the newly added backup unit, which ensures consistency across the cluster.
NEW QUESTION # 49
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
- A. You can add charts to generated reports using this feature.
- B. In Log View, this feature allows you to build a dataset and chart automatically, based on the filtered search results.
- C. This feature allows you to build a chart under FortiView.
- D. In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log entries.
Answer: B
NEW QUESTION # 50
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. oftpd
- B. miglogd
- C. logfiled
- D. sqlplugind
Answer: B
Explanation:
The miglogd process on FortiGate is responsible for handling log forwarding and caching. When FortiAnalyzer is unreachable, miglogd temporarily stores logs in a local cache until the connection is restored.
This prevents log loss during temporary network interruptions or FortiAnalyzer outages.
Reference: https://forum.fortinet.com/tm.aspx?m=143106
NEW QUESTION # 51
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
- A. Report scheduling
- B. Output profiles
- C. Custom datasets
- D. Report settings
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/upgrade-guide/669300/checking-reports
NEW QUESTION # 52
What is the purpose of employing RAID with FortiAnalyzer?
- A. To separate analytical and archive data
- B. To introduce redundancy to your log data
- C. To back up your logs
- D. To provide data separation between ADOMs
Answer: B
Explanation:
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensive,%
2C%20performance%20improvement%2C%20or%20both.
NEW QUESTION # 53
Refer to the exhibit.
What does the data point at 12:20 indicate?
- A. The log insert lag time is increasing.
- B. FortiAnalyzer is using its cache to avoid dropping logs.
- C. The sqlplugind service is caught up with new logs.
- D. The performance of FortiAnalyzer is below the baseline.
Answer: C
NEW QUESTION # 54
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin", and coming from Laptop1.
Which filter will achieve the desired result?
- A. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
- B. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
- C. operation-login & performed_on=="GUI(10.1.1.210)" & user!=admin
- D. operation-login & dstip==10.1.1.210 & user!-admin
Answer: A
NEW QUESTION # 55
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.
Similarly, which feature you can use for FortiView?
- A. Export to Custom Chart
- B. Export to Chart Builder
- C. Export to Report Chart
- D. Export to PDF
Answer: C
Explanation:
Reference:
Similar to the Chart Builder feature in Log View, you can export a chart from a FortiView. The chart export includes any filters you set on the FortiView. FortiAnalyzer_7.0_Study_Guide-Online pag. 292.
NEW QUESTION # 56
Which statement is true when you are upgrading the firmware on an HA cluster made up of throe FortiAnalyzer devices?
- A. All FortiAnalyzer devices will be upgraded at the same time.
- B. First, upgrade the secondary devices, and then upgrade the primary device.
- C. Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade.
- D. You can perform the firmware upgrade using only a console connection.
Answer: B
Explanation:
In an HA cluster, the firmware upgrade process involves upgrading the secondary devices first. This approach ensures that the primary device can continue to handle traffic and maintain the operational stability of the network while the secondary devices are being upgraded. Once the secondary devices have successfully upgraded their firmware and are operational, the primary device can then be upgraded. This method minimizes downtime and maintains network integrity during the upgrade process.
When upgrading firmware in a High Availability (HA) cluster of FortiAnalyzer units, the recommended practice is to first upgrade the secondary devices before upgrading the primary device. This approach ensures that the primary device, which coordinates the cluster's operations, remains functional for as long as possible, minimizing the impact on log collection and analysis. Once the secondary devices are successfully upgraded and operational, the primary device can be upgraded, ensuring a smooth transition and maintaining continuous operation of the cluster.
Reference: FortiAnalyzer 7.2 Administrator Guide - "System Administration" and "High Availability" sections.
NEW QUESTION # 57
Which process caches logs on FortiGate when FortiAnalyzer is not readable?
- A. oftpd
- B. miglogd
- C. logfiled
- D. sqlplugind
Answer: B
Explanation:
The process logfiled in FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full, logfiled allows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.
Reference: FortiOS 7.4.1 Administration Guide, "Log Buffering" and "Reliable Logging" sections.
NEW QUESTION # 58
When you perform a system backup, what does the backup configuration contain? (Choose two.)
- A. Authorized devices logs
- B. System information
- C. Device list
- D. Generated reports
Answer: B,C
Explanation:
https://help.fortinet.com/fa/cli-olh/5-6-5/Content/Document/1400_execute/backup.htm Reference: https://help.fortinet.com/fauth/5-2/Content/Admin%20Guides/5_2%20Admin%20Guide/300
/301_Dashboard.htm
NEW QUESTION # 59
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?
- A. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
- B. FortiAnalyzer flags the associated host for further analysis.
- C. The detection engine classifies those logs as Suspicious
- D. A new Infected entry is added for the corresponding endpoint.
Answer: D
NEW QUESTION # 60
How are logs forwarded when FortiAnalyzer is using aggregation mode?
- A. Logs and content files are stored and uploaded at a scheduled time.
- B. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
- C. Logs and content files are forwarded as they are received.
- D. Logs are forwarded as they are received.
Answer: A
Explanation:
https://www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/420493/modes Reference: https://docs.fortinet.com/document/fortianalyzer/6.2.0/cookbook/63238/what-is-the-difference- between-log-forward-and-log-aggregation-modes
NEW QUESTION # 61
When working with FortiAnalyzer reports, what is the purpose of a dataset?
- A. To retrieve data from the database
- B. To define the chart type to be used
- C. To set the data included in templates
- D. To provide the layout used for reports
Answer: A
Explanation:
Reference:
Datasets: Structured Query Language (SQL) SELECT queries that extract specific data from the database
NEW QUESTION # 62
......
Fortinet FCP_FAZ_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Get instant access of 100% real exam questions with verified answers: https://exam-labs.itpassleader.com/Fortinet/FCP_FAZ_AD-7.4-dumps-pass-exam.html